skip_navigation

OPTIKRIK TENSION GAUGE

  2. Products
  3. Service Tools
OPTIKRIK TENSION GAUGE The gauges reliably verify if the V-belt, the kraftband...

 

The tension testers reliably inspect whether the V-belt, kraftband or ribbed belt has the correct tension.

Particular Advantages
This simplified tension method is intended to simplify the maintenance of belt drives for the installer in the event that the most important technical data is unknown and the ideal default tension is unavailable.

 

OPTIKRIK manual gauges are available in 4 different tension ranges (0,1,2,3). They are the simplest way to get a quick reference of your drive's performance.  

Technical Data

  • Optikrik 0   Measuring range:    70 - 150 N
  • Optikrik I    Measuring range:    150 - 600 N
  • Optikrik II   Measuring range:    500 - 1,400 N
  • Optikrik III  Measuring range:    1,300 - 3,100 N


Procedure for the application

1. Determine the belt section of your drive belt

2. For this purpose, measure the smallest pulley diameter in the drive system

3. You can read the corresponding strand force from the table

4. Check the tension with the Optikrik as described in the instructions for use

Product downloads

Get in contact with us

optibelt-Newsource.jpg
Optibelt-Norbert-Zement.png

Illinois (Headquarter)

1580 W. Stearns Rd.
Bartlett, IL 60103

Phone: 800-292-6081
E-Mail: info[at]optibelt-usacom

Construction aid: optikrik tension gauges
pdf
689 KB