skip_navigation

optibelt MT-A

For the safe installation of elastic EPK ribbed belts


With the optibelt MT-A, you are provided with a universal tool which can actually replace a multitude of expensive specialised tools of vehicle manufacturers.

The high quality tool is characterised by its resilient material and easy handling. The belts can therefore be installed quickly and professionally. The optibelt EPK belt and a screwdriver or socket spanner are the only things that are additionally needed to turn the drive pulley manually. The optibelt MT-A comes in a sturdy plastic box including instructions and a tool for dismantling the belts.

Due to its specialised operating mode, the tool is applicable for various types of vehicles and is therefore designed for long-term use. We recommend the acquisition of the optibelt MT-A for every garage that wants and needs to be prepared.

Product downloads

optibelt MT-A fact sheet
pdf
362 KB
optibelt-automotive-service-tools-mt-a.png


 

Advantages:

  • Easy handling
  • Supplied in a sturdy plastic box and comes with detailed instructions
  • Additional aid for dismantling old belts

optibelt MT-A II mounting tool


optibelt MT-A II

Special tool for the safe installation of EPK elastic ribbed belts


It is essential that elastic ribbed belts are fitted to belt pulleys safely and without damaging them. Damaging or overstretching the sensitive tensile reinforcement must be prevented at all costs. optibelt MT-A II mounting tool enables the generator belt to be changed easily and professionally. The special tool for certain Ford and Volvo engines is needed since the belt slips off the water pump pulley when the  MT-A II tool is used. The MT-A tool is required for the second belt that drives with either the servo pump or the air conditioning compressor, depending on the vehicle.

The MT-A II comes in a sturdy plastic box with instructions for easy handling.

Product downloads

optibelt MT-A II fact sheet
pdf
332 KB
optibelt-automotive-service-tools-mt-a-ii.png



optibelt TT-A

for quick and precise determination of correct drive belt tension


The optibelt TT-A frequency meter makes it possible for vehicle repair shops to determine and regulate the correct tension quickly and in an uncomplicated manner. In this way, during maintenance and the replacement of drive belts, you are always on the safe side.

The measured value is indicated in Hertz on the display of the device.
The required configuration values for multiple vehicles can be determined simply by checking the supplied manual. This type of measurement has stood the test of time for years at optibelt and reflects the current state of the art.

The optibelt TT-Ameasures the tension of optibelt RBK and optibelt ZRK belts as well as OE and OE-identical timing belts and ribbed belts.

Product downloads

optibelt TT-A fact sheet
pdf
133 KB
optibelt-automotive-service-tools-tt-a.png


 

Advantages:

  • Easy one-button operation
  • Compact detecting element, even in the case of narrow engine compartments and areas that are difficult to access
  • Easy-read LCD display
  • Automatic shut-down after 3 min.
  • Acoustic measuring signal


optibelt LASER POINTER II

Aids the alignment of belt drives


Optibelt recommends the handy and precise optibelt LASER POINTER II for aligning drives. Alignment is easier because it is not necessary to hold a levelling cord, and the powerful and bright laser beam is visible on the silver target magnets. The assembly engineer can also perform alignment quicker and more accurately. Less friction means less wear on pulleys and belts, longer running times and so fewer downtimes.

Reduction in spare parts costs. In the case of several or large drives, the use of the
optibelt LASER POINTER II usually pays off within the first month of purchase.

Product downloads

Service tools fact sheet
pdf
254 KB
optibelt-automotive-service-tools-laserpointer.png



optibelt OPTIKRIK 0, I, II, III

Tests reliably whether the V-belt, kraftband or ribbed belt has the correct tension


Regularly use the tension gauge to check if the V-belt, the kraftband or the ribbed belt is running properly in your vehicle.

Handling the measuring gauges is simple. Our field service team will be happy to assist you.

Product downloads

Service tools fact sheet
pdf
254 KB
optibelt-automotive-service-tools-optikrik.png



optibelt MEASURING GAUGE

Measurement range: 500 -3550 mm inside length (Li)


For V-belts, timing belts and ribbed belts.

Measuring range: 500 -3550 mm inside length (Li)

Product downloads

Service tools fact sheet
pdf
254 KB
optibelt-automotive-service-tools-messlatte.png