skip_navigation

Reliable and safe protection against X-rays

optibelt ELASTOMIT-R X-ray protection qualities have proved themselves in the market as reliable and safe protection against X-rays up to 150 kV. In personal X-ray protection, Optibelt quality is used in X-ray aprons. Customers can choose from standard lead, ultra-light lead  and lead-free grades. All qualities are based on a vulcanised rubber matrix.  

Products


optibelt ELASTOMIT-R STANDARD

optibelt ELASTOMIT-R STANDARD

optibelt ELASTOMIT-R standard X-ray protection grades are made from a combination of lead and rubber (with a rubber base). The protective lead is added to a special form of rubber matrix.


optibelt ELASTOMIT-R LEAD-REDUCED

optibelt ELASTOMIT-R LEAD-REDUCED

In these rubber-based grades, the lead content is reduced and replaced by other suitable materials with a low specific gravity. Remarkably, the same shielding effect is achieved even though the weight has been reduced.


 optibelt ELASTOMIT-R LEAD-FREE

optibelt ELASTOMIT-R LEAD-FREE

The lead-free grades are based on a rubber compound and do not contain any lead. The lead was completely replaced with other suitable metals with a similar specific weight. An identical shielding effect is obtained as a result.


They are also available as a single-coat material and in various equivalent Pb values ranging from 0.125 mm–1.00 mm Pb (according to national and international X-ray standards). The sheets can be produced to customers' requirements with fabric inserts and covers as well as different covering layers.

All optibelt ELASTOMIT  X-ray protection qualities without a fabric inlay up to a Pb equivalent of 0.35 mm Pb  are 100% checked for defects during the production process using a Hi-Scan continuous X-ray system in order to guarantee maximum quality and safety.

Advantages of the rubber base

High elongation at break

Low residual elongation

Wear comfort

High tear strength

Excellent flexibility

Learn more about us

Optibelt-David-Elastomer.png

Optibelt Elastomer Solutions GmbH

Corveyer Allee 15
D-37671 Höxter/Germany

Tel.: +49 5271 621
Email: info-oes[at]optibeltcom