Hoexter 02.02.2021. The optibelt ATC-SYSTEM enables the flexible and quick assembly of special attachment belts by the end user.
It consists of a extruded timing belt, which can be welded to create an ALPHA V ATC belt of any length that‘s a multiple of tooth-pitch and over the applicable minimum length. Due to the prefabricated recesses, the end user is able to move or change attachments individually.
The ATC-IN inserts belonging to the product have been designed in such a way that they can be inserted in any tooth after perforation of the belt back using the ATC punching tool. For this purpose, only the remaining PU cover layer has to be cut through.
The optibelt ATC-SYSTEM is available in the following profiles and widths:
ATC10: 25,32 and 75mm with C=14mm - M4
ATC10: 50, 100 and 150mm with C=25mm - M4
ATC20: 50, 100 and 150mm with C=25mm - M5
The centre distance C refers to the centre distance of the threaded sleeves of the stainless steel ATC-IN inserts, which are required for fastening driver profiles.