skip_navigation

How to use

1. Determine the belt section of your drive belt

2. For this purpose, measure the smallest pulley diameter in the drive system

3. You can read the corresponding belt tension from the table

4. Check the tension with the Optikrik as described in the instructions for use

Downloads

Construction aid: optikrik tension gauges
pdf
689 KB
Optibelt CAP
With CAP offline from Optibelt, you can easily calculate your drive design.
Click here for our Rubber timing belts product range in the e-shop.
Everything at a glance - the Power Transmission Compact catalogue.

Learn more about us

Optibelt GmbH

Image trailer

Optibelt-Norbert-Zement.png

Optibelt GmbH

Corveyer Allee 15
D-37671 Höxter/Germany

Tel.: +49 5271 621
Email: info[at]optibeltcom