Tools

Joining tool

Friction welding tool RS02 for round sections, V-sections and special profiles

optibelt-produkte-mechan-bearbeitung-reibschweissgeraet.jpg

Advantages of the RS02:

Precision clamping jaws and automatic 0 position prevent offset welding seams
Speed-controlled friction heat guarantees 100% welding
No bad welded seams due to temperature fluctuations or draughts
Ideal for welding optibelt RR and optibelt KK

Accessories for friction welding machine RS02:

Friction welding machine
1 set of standard clamping jaws of your choice
1 Allen key
1 pair of scissors AS02
1 edge cutter SE02
1 carrying bag with a hard foam inlay

Standard set of jaws:

For round belts from Ø 6 mm to 20 mm
For V-belts from 6 x 4 mm to 22 x 14 mm
For various special profiles

optibelt-produkte-verbindungswerkezeug-spannbacken-rundriemen.jpg — for round belts

optibelt-produkte-verbindungswerkezeug-spannbacken-keilriemen.jpg — for v-belts

optibelt-produkte-verbindungswerkezeug-spannbacken-sonderprofile.jpg — for special profiles

Additional standard clamping jaws for round profiles and V profiles are available at extra cost.

Clamping jaws for PU special profiles can also be produced on request.

Joining tool

Basic service case

The five-part Basic case provides the user with a complete standard kit for occasional use.

Welding tool SG02 has a longer warm-up phase than the Premium service case model and is suitable only for welding urethane belts for optibelt RR, optibelt HRR and optibelt KK, whenever the need arises, using the two guide clamps supplied.

The guide clamp model FZ01 is used for round section belts with a diameter of up to 10 mm and V-belts up to profile 10, while model FZ02/3 is used for round section belts with a diameter of 8 mm or more and V-belts up to profile 32.

A pair of shears and an edge cutter for removing the welded seam are also included in the equipment to obtain a perfect cut for optimal welding.

All items included in the Basic service case can also be purchased separately. Further spare parts are listed in the round belt accessories section.

Guide clamp FZ02/3
for round section belts with a diameter of 8 mm or more and V-belts up to profile 32 (D)

Edge cutter SE02
for removing the welded seam

Shears AS02
for cutting round section belts and V-belts

Guide clamp FZ01
for round section belts up to a diameter of 10 mm and V-belts up to profile 10 (Z)

Welding tool SG02
for PU 290-300°C; electrical connection: 230 V

Joining tool

Premium service case

This five-piece Premium service case is suitable for everyday use. With its ergonomic and temperature-controlled EErgo welding tool, TPE and PU belts for optibelt RR, optibelt HRR and optibelt KK can be welded at just the touch of a button.

The versatile FZ01 Vario clamp is the perfect complement to the welding kit. Due to the quick-clamp feature, round section belts up to a diameter of 10 mm and V-belts up to profile 10 can be clamped and welded in a very short time. The exchangeable profile jaws also make it possible to weld special profiles. The Premium kit also includes an additional pair of guide clamps for use for round section belts with a diameter of 8 mm or more and V-belts up to profile 32.

The kit is rounded off with a pair of shears with an adjustable angle stop which allows straight and angled cuts to be made, and an edge cutter for removing the welded seam.

All items included in the Premium service case can also be purchased separately. Further spare parts are listed in the round belt accessories section.

Guide clamp FZ02/3
for round section belts with a diameter of 8 mm or more and V-belts up to profile 32 (D)

Edge cutter SE02
for removing the welded seam

Shears AS04
with adjustable angle stop

optibelt-produkte-zubehoer-fuehrungszange-fz01-vario.jpg

FZ01 Vario guide clamp
with exchangeable profile jaws, for round section belts up to a diameter of 10 mm and V-belts up to profile 10 (Z)

EERGO welding tool
for TPE and PU profiles; takes less than 2 minutes to heat up, temperature-controlled welding tool, ergonomic and fast

optibelt TT

for quick and exact determination of correct drive belt tension

The optibelt TT frequency tension tester is used to check the tension of drive belts by measuring their frequency of vibration. Due to its compact design, it offers universal application possibilities for drives in engineering, in the automotive industry and for many other technical applications.

The optibelt TT is designed even for difficult-to-reach places, making it ideal for quickly and easily checking the tension of V-belts, ribbed belts and timing belts.

The appliance is ready to transfer data immediately after switching on. The measuring head must be held over the belt to be measured (two red LED light points help to position it). The tensioned belt is then made to vibrate by plucking or striking it with a finger or an object. The optibelt TT starts to take readings and shows the results in hertz [Hz]. The type, condition and colour of the belt have no effect on the readings.

Tension recommendations can be taken from Optibelt specifications and CAP calculations.

Downloads

Quick reference guide

pdf

1 MB

Advantages:

Easy one-button operation
Compact detecting element even in the case of areas that are difficult to access
Easy-read LCD display
Automatic shut-down after 3 min.
Acoustic measuring signal