High performance polyurethane timing belts

Sections:
T2,5; T5; T10; AT5; AT10;
double section timing belts DT5 and DT10

Dimensions : 
120 to 2,250 mm

Timing belts / double section timing belts – imperial single belts and sleeve goods

Sections:
T2,5, T5, T10, T20, AT5, AT10, AT20

Dimensions: 
120 to 2,350 mm

Timing belts – endless

Sections:
T5, T10, T20, AT5, AT10, AT20

Dimensions: 
1,500 to 24,000 mm

Timing belts – open-ended

Sections:
XL, L, H, XH, 5M, 8M, 14M

Dimensions: 
Cut goods from 600 mm

Optibelt ALPHA linear FDA blue timing belts are
manufactured from a PU basic component which
is FDA approved.

Colours: Standard: blue, transparent on request
Cords/Sections: Aramid tension cord: T5; T10
Stainless steel tension cord: T10; T20; AT10; H; 8M
Dimensions: 
Cut goods, welded, from 1,000 mm;
Further sections and shorter length ranges on request

Extruded, open-ended polyurethane flat belts

Sections:
F2, F3

Dimensions:
On request (roll goods)

Timing belts – endless, welded

Sections:
L, H, XH, T5, T10, T20

Dimensions: 
Cut goods from 600 mm

Polyurethane track timing belts

Profile:
T5, T10 available
AT5, AT10 projected

Dimensions:
Cut goods from 600 mm
Roll length 50 m

Refined timing belts with coating · with cleats · mechanically processed

Sections:
T5 / AT5, T10 / AT10, T20 / AT20, XL, L, H, XH

Dimensions:
On request

Clamping plates are used in linear technology in order to fasten the timing belts onto the housing.
These plates are available in standard widths from stock.